Superior Coatings System |
|
Epoxies:
Insl-Tile
Acrylic Epoxy Coating
Description:
A 2-component, 4:1 mix ratio, high gloss system that is a superior catalyzed
coating for walls and other surfaces combining the resistance properties
of solvent-base-epoxy along with the color and gloss retention of acrylics.
Suggested
Uses
Use on wood, concrete, plaster, primed and previously painted metal.
Ideal for use in schools, hospitals, food processing plants.
Colors
White (Custom colors available on special orders)
Finishes
Gloss
Theoretical
Spread Rate/Gal: 286 HMIS Value: H=1 F=0 R=0 PP=B
Insl-Tile
Clear Epoxy Sealer
Description:
2-component penetrating epoxy primer sealer, saline modified for outstanding
adhesion to concrete.
Suggested
Uses
Concrete floors, revetments, primer for trac-blasted floors.
Colors
Clear
Finishes
Gloss
Theoretical
Spread Rate/Gal: 339 HMIS Value: H=2 F=3 R=0 PP=F
Insl-Tile
Activated Epoxy Coating
Description:
A 2-component, 1:1 ratio, activated polyamide epoxy. Insl-Tile is a
durable, flexible, chemically resistant finish for interior or exterior
surfaces exposed to corrosive environments. Insl-Tile has been proven
by years of exposure to fumes or splashes from solvents, acids, alkalis
and moisture.
Suggested
Uses
Machinery, masonry, floors, walls, concrete, steel, tile, fiberglass,
porcelain, wood. Excellent for use in food processing plants, water
waste treatment plants, power generating plants, and marine service.
Colors
Clear, White and bases to tint over 3000 custom colors.
Finishes
High or Semi-Gloss (by choice of B Component)
Theoretical
Spread Rate/Gal: 401 HMIS Value: H=2 F=3 R=0 PP=F
Insl-Tile
100% Solids Epoxy Coating
Description:
A 2-component, 1:1 ratio, self leveling epoxy resurfacer for protection
of concrete and other horizontal surfaces in heavy use environments.
EP-5200 has a ZERO VOC rating as it contains no solvents. This system
has outstanding impact, chemical abrasion and chemical resistance, making
it ideal for use on industrial floors that endure heavy foot traffic
or are exposed to material handling equipment. This high-build film
product produces a high-gloss, tile like finish. The low odor makes
this product perfect for use in food processing plants or areas where
food products are stored and other occupied buildings.
Suggested
Uses
Floors exposed to heavy foot and rubber covered wheel traffic, as well
as occasional chemical spills and splashes. Also, floors where odor
and flammability are of concern at time of application. Ideal for use
in high traffic areas, nuclear waste water treatment facilities, pulp
and paper, and petrochemical plants, garage and airport hanger floors,
manufacturing and warehouse floors, etc.
Colors
Clear, Light Gray and White. Other colors available as special order.
Finishes
High Gloss
Theoretical
Spread Rate/Gal: 100 HMIS Value: H=3 F=1 R=0 PP=C
