Superior Coatings System |
|
Epoxies:
Description:
Water-based Epoxy
A new generation, 2-component, water-based catalyzed epoxy, which gives
performance equal to solvent based epoxy systems. Low odor, non-toxic.
Class "A" fire rated, nonflammable. Excellent as a floor coating. Won't
lift existing coatings.
Suggested
Uses
Steel, Galvanized steel, masonry, concrete, drywall, non-ferrous metal.
Excellent for use in schools, hospital, nursing homes, municipalities,
garage floors, institutions and where low odor systems are required.
Colors
8 colors, 3 bases (tinted with Universal Colorants)
Finishes
High Gloss
Theoretical
Spread Rate/Gal: 313 HMIS Value: H=1 F=0 R=0 PP=B
Description:
Activated Epoxy Coating
A high gloss 2-component, 1:1 ratio, activated polyamide epoxy. Insl-Tile
II is a durable, flexible, chemically resistant finish for interior
or exterior surfaces exposed to corrosive environments such as fumes
or splashes from solvents, acids, alkalis and moisture. A low VOC epoxy
coating that is excellent for use on machinery, porcelain, masonry,
concrete, fiberglass, wood and tile. Can be used in hallways, floors,
walls, and is lead and chromate free.
Suggested
Uses
Machinery, wood, steel, walls, tile, concrete, marine structures, hallways,
fiberglass, porcelain, floors, storage tanks.
Colors
9 colors, 5 safety colors, white, black and 2 grays
Finishes
High Gloss
Theoretical
Spread Rate/Gal: 392 HMIS Value: H=2 F=3 R=0 PP=F
Description:
Epoxy
A 2-component, heavy bodied polyamide cured coal tar epoxy that is highly
resistant to chemicals and corrosion. Ideal for use in the protection
of metal and masonry surfaces. Meets Army Corps of Engineers C200 specifications,
SSPC16 and MIL-P-23236, Type 1, class 1.
Suggested
Uses
Sewage Treatment Plants. Interior and exterior of storage tanks containing:
naphtha, diesel fuel, crude oil and salt brine. Ideal for use on steel
and masonry surfaces subject to fresh water immersion, salt water immersion,
tidal and splash zone exposures, chemical and underground exposures.
Colors
Black
Finishes
Semi-Gloss
Theoretical
Spread Rate/Gal: 124-154 HMIS Value: H=2 F=3 R=0 PP=H
Description:
Mastic
A self-priming, high build, 2-component epoxy that can be applied directly
to rust or to previously painted surfaces.
Suggested
Uses
Bridges, paper and pulp mills, offshore rigs, revetments, sewage treatment
plants, excellent as an encapsulate.
Colors
White plus Bases to tint over 3000 colors
Finishes
Semi-Gloss
Theoretical
Spread Rate/Gal: 291 HMIS Value: H=2 F=3 R=0 PP=F
Description:
Concrete Sealer
A single component, transparent, quick drying epoxy which seals, hardens
and dust proofs interior surfaces. CS-4675 retards evaporation of water,
providing an efficient and economical method of curing concrete
Suggested
Uses
Warehouse floors for dust control, membrane for fresh poured concrete,
interior wood floors.
Colors
Clear
Finishes
Gloss
Theoretical
Spread Rate/Gal: 267 HMIS Value: H=2 F=2 R=0 PP=C
