Superior Coatings System |
|
Primers:
Description:
Water-based, Primer/Sealer, Stain Killer
A new generation acrylic emulsion paint that has outstanding sealing
and stain killing. It provides maximum protection while reducing labor
costs by its fast-dry capability for all types of surfaces. Aqualock
eliminates the odor of solvents, and conforms to VOC regulations. It
can also be used for industrial applications over previously painted
surfaces, replacing a solvent based primer. Stops flash rusting.
Suggested
Uses
Barrier coat over alkyds to prevent lifting when topcoating with epoxy
or urethanes. Stain seal to prevent bleed-through of markers, ball-point
pen, lipstick, etc. Tie coat for difficult to adhere to substrates.
Excellent for plaster board, wood, sheet rock, etc.
Colors
Off white (custom colors available on special order) (may be tinted
with Universal Colorants)
Finishes
Eggshell (low sheen)
Theoretical
spread Rate/Gal.: 345 HMIS Value: H=1 F=0 R=0 PP=C
Description:
Primer/Sealer, Stain Killer
A fast Drying, White pigmented coating that both primes and seals plaster,
wood, drywall and masonry. Developed as a low odor, low VOC, solvent
base primer. Prime Lock provides excellent enamel holdout, will not
raise wood grain; and is a high performance reactive stain blocker that
seals stains from smoke damage; bleed-through from wood knots, crayon,
lipstick, etc. Can be topcoated with any latex and most aklyd finish
coats.
Suggested
Uses
Plaster Board, Wood, Sheet Rock, Primer/Sealer for Vinyl Wall Coverings
Water Stains. Retards bleed-through from lipstick, crayon, ink, ball
point pen, varnish.
Colors
White (may be tinted with Universal Colorants)
Finishes
Flat
Theoretical
Spread Rate/Gal.: 329 HMIS Value: H=2 F=3 R=0 PP=F
Description:
Primer/Sealer, Stain Killer
An Alcohol-based coating that stops bleeding on plaster, wood, metal,
and masonry. It is ideal as a replacement for pigmented shellac. Seal-Lock
may be used as a primer for porous wallboard, plasterboard, drywall
construction and plywood; as a sealer for "HOT plaster," patches and
spots, asphalt coatings, plaster walls, wood, multicolor finishes, and
metal; and as a stain killer for creosote, asphalt, crayon, ink, redwood,
grease and knots. Applicable for interior or exterior use. For exterior
use, spot prime only.
Suggested
Uses
Wallboard, Plaster Board, Drywall, Wood, Plywood, Plaster, Water Stains,
sealer for "HOT" Plaster, Fire and Smoke damage, stain killer for creosote,
asphalt, crayon, ink, knots, wood stains, sap and lipstick.
Colors
White
Finishes
Flat
Theoretical
Spread Rate/Gal.: 352 HMIS Value: H=2 F=3 R=0 PP=F
Description:
A white pigmented waterbase primer sealer for interior surfaces, such
as unpainted drywall, new plaster, previously painted surfaces (gloss,
semi-gloss of flat), existing wallcoverings, vinyls, stripable, foils,
mylars, hand-prints and grass cloths.
Colors
White (may be tinted with a maximum of 4 ounces of Universal Colorants
per gallon)
Finishes
Lo Lustre
Theoretical
Spread Rate/Gal.: 345 HMIS Value: H=1 F=0 R=0 PP=C
Description:
A water reducible product that chemically converts tightly adhered rust
to a black iron complex, thus stopping the corrosion mechanism. Can
be topcoated with conventional or exotic finishes.
Suggested
Uses
Rusted areas where sandblasting in not acceptable, repair and maintenance
of existing systems.
Finishes
Turns black over rust, gives a bluish milky fill on non-rusted surfaces.
Theoretical
Spread Rate/Gal.: 208 HMIS Value: H=1 F=0 R=0 PP=C
Description:
Waterbased Epoxy Primer
A 2-component, lead and chromate free, high performance chemical and
corrosion resistant epoxy primer.
Suggested
Uses
Food processing plants, paper and chemical plants, areas where odor
at application is a problem (hospitals, schools, office buildings).
Colors
Gray
Finishes
Flat
Theoretical
Spread Rate/Gal.: 329 HMIS Value: H=1 F=0 R=0 PP=B
Description:
This low luster primer product is designed for use as a shopcoat primer
for structural or architectural steel. Has good wetting properties providing
penetration and bonding for power or hand tool cleaned surfaces. For
use in mild to moderate atmospheric services. Dries rapidly and is adaptable
for production line coating applications.
Suggested
Uses
Structural steel, architectural steel.
Colors
SC-4411 Gray, SC-4415 Red
Finishes
Flat
Theoretical
Spread Rate/Gal.: 363 HMIS Value: H=2 F=2 R=0 PP=F
Description:
Wash, Primer
A 2-component pre-treatment primer for steel, galvanized aluminum and
other non-ferrous metals.
Suggested
Uses
On non-ferrous metals to promote adhesion of paint system. On ferrous
metal for severe environments. As a tie-coat on inorganic zinc primers.
Colors
Yellow-Green
Finishes
Flat
Theoretical
Spread Rate/Gal.: 330 HMIS Value: H=3 F=3 R=0 PP=F
